Garrard & Blumfield’s phaeton
In the second ever issue of Autocar, we published a piece on the Garrard & Blumfield electric four-seater, which had an 80-mile range
In the second ever issue of Autocar, published 6 November 1895, we published a report from the Cyclist magazine on an electric car that had been built in the summer of 1894.
Produced by the Garrard & Blumfield bicycle engineering company of Coventry, it was a four-seat phaeton with an innovative drive system.
“We understand that Messrs. Garrard and Blumfield hold a master patent for the known elements of (I) pneumatic tyres, (2) balance gear, (3) steel tubing, (4) ball bearings; and (5) electric power,” we began.
“The mechanism of the carriage and its framework are built throughout of weldless steel tube, the general design of the frame being not largely dissimilar from that adopted in the Rudge quadricycle of a year two back.
All four of the phaeton’s wheels were 24in in diameter and shod in 4in pneumatic tyres. As with all other working parts of the vehicle, they ran upon ball bearings.
“The front two wheels are steered by means of a long ball socket head, actuated by a wheel and tangent screw,” we explained.
The electric power unit for the Garrard & Blumfield was “contained in a series of twenty-four accumulator (rechargeable) cells”. These were likely lead acid, although we could not find any writing confirming this.
“The accumulators (batteries) weigh some 500lbs,” we continued, “and the completed vehicle comes out at about 1000lbs, or, roughly speaking, about half a ton, as against two and a half tons the weight of the lightest electric road carriage hitherto placed upon the road.”
The phaeton’s “cells were connected with a motor carried upon the (car’s) framework beneath; the spindle which the motor works, being arranged with a feather, so that it can be slid to and fro several inches by means of a lever, placed in contiguity to the rider’s left hand.”
“This is effected by quite a new system,” we said, with “the spindle carrying a roller or a pair of rollers so arranged that they jamb between the surfaces of two metal discs which face each other in the rear portion of the carriage.
“By sliding the roller in or out from the centre of these discs, the power applicable, and inversely the speed attained, is graduated to the nicest degree. The discs are then connected by toothed gearing and a chain with the balance gear which drives the two back wheels.”
This method, instead of finding a way to modulate the available power, “saved a tremendous waste of electricity”.
As with modern electric cars, such as the Tesla Model S, which is built upon a ‘skateboard’ chassis with battery packs incorporated, any body could then simply be placed on top of this mechanism. In the prototype we reported on, this was of two forward-facing seat benches behind one another at the same height.
“A very powerful band brake acting on the balance gear is worked by a foot lever placed conveniently to the right foot of the engineer,” who sat on the left of the car.
Performance was quite impressive, the car “being calculated as able to run at speeds varying from 3½ to 13½mph, according to the gradient over which it is running, or the wish of the occupants.”
Astonishingly, range was sufficient for a run of 70-80 miles; today, most electric cars can do about 125, albeit while driving at much greater speeds. A full recharge was not expected to exceed 3s. According to the Bank of England, that’s roughly equivalent to £18 today.
A writer of the Cyclist magazine was there for the very first test drive of the Garrard & Blumfield. He found “all of its parts to be plated and enamelled, in fact, perfectly finished, before being put together”, and “at the first connection of the parts, it moved off easily and smoothly across the workshop”.
He had the pleasure of trying it there, and then on public roads at 3am on a Thursday, in order for “the roads to be free for experiment,” driving to Birmingham, a distance of 18 miles. This journey it “accomplished perfectly, a speed of 10mph being maintained over many parts of the road”.
It created quite some stir when being driven through the city the next day, too.
We concluded by saying: “We have little doubt that there is a large and prosperous future before this class of carriage,” before “appending a photographic illustration of the strange beastie”.
What a shame that electric vehicles never truly took off, and are only returning to the forefront of the industry now, 120 years later. If they had co-existed with ICE cars, who knows what the common electric car would be like today, and for how long ICEs would have been dead and buried.
In 1896, the Garrard & Blumfield company was subsumed into the Great Horseless Carriage Co, which also owned Daimler patents, and went out of business in 1910.
Charles R. Garrard went on to build motorcycles to some success, and became a senior figure at Clément-Talbot. He died in 1955.
Thomas W. Blumfield went on to work on bicycles and motorcycles for Humber. He died in 1956.